Insertion Vortex Flow Meter Types
1. Simple Insertion Vortex Flow Meter. Suitable for most measurement conditions.
2. Simple Insertion Vortex Flow Meter with temperature and pressure compensation. Suitable for gas and steam measurement conditions.
3. With installation ball valve Insertion Vortex Flow Meter. It is suitable for working conditions where pipeline media cannot leak.
Insertion Vortex Flow Meter installation
Insertion Vortex Flow Meter installation steps:
1. Use gas welding to open a round hole slightly smaller than Φ100m on the pipe, and clean the burrs around the hole to ensure smooth rotation of the probe.
2. Weld the flange provided by the manufacturer to the round hole of the pipe, and the axis of the flange is required to be perpendicular to the axis of the pipe.
3. Install the ball valve and sensor on the welded flange.
4. Adjust the screw to make the insertion depth meet the requirements (make sure the central axis of the probe coincides with the central axis of the pipe), and the fluid flow direction must be consistent with the indicator arrow on the direction mark.
5. Tighten the screws on the gland evenly. (Note: The tightness of the gland determines the sealing degree of the instrument and whether the screw can rotate)
6. Check whether each link is completed, slowly open the valve and observe whether there is leakage (pay special attention to personal safety). If there is leakage, please repeat steps 5 and 6.
Insertion Vortex Flow Meter for water treatment
In the water treatment process, the flow of incoming water, outgoing water and process water needs to be accurately measured and controlled to ensure the normal operation of the water treatment process. The Insertion Vortex Flow Meter is widely used in the water treatment industry due to its advantages of high measurement accuracy, good stability, simple structure, and easy installation.
In the water treatment industry, Insertion Vortex Flow Meter is mainly used in the following aspects:
1. Inlet water flow measurement: During the water treatment process, it is necessary to accurately measure the amount of water entering the water treatment equipment. In order to adjust the operating parameters of the water treatment equipment according to the actual water volume. Vortex flow meters can accurately measure incoming water flow and provide important data support for the operation of water treatment equipment.
2. Measurement of effluent flow: During the water treatment process, the effluent flow after treatment needs to be measured in order to evaluate the water treatment effect. Vortex flow meters can measure water flow in real time and accurately, providing important data basis for evaluating water treatment effects.
3. Process water flow measurement: During the water treatment process, it is necessary to measure the water flow in each treatment link. In order to adjust the treatment parameters in time to ensure the normal operation of the water treatment process. Vortex flowmeters can accurately measure process water flow in real time. Provides important data support for the control of water treatment processes.
4. Leak detection: In water treatment equipment, leaks may occur. The vortex flowmeter can measure the flow changes before and after the leak point. Leakage is detected in time to avoid wastage of water resources.
Overall, Insertion Vortex Flow Meter plays an important role in the water treatment industry. Not only can it accurately measure various water flows, it can also be used for leak detection. Provides important technical support for the normal operation of the water treatment process.
