Integral v cone flow meter large diameter

V Cone Flow Meter-New Type DP Flow Meter

V cone flow meter is a new type of differential pressure flow meter. It uses a V-cone to create a throttling effect in the flow field to measure flow.

1. Low installation requirements. The first 0～3D straight pipe, the rear 0～1D straight pipe section;
2. Wide range ratio. It is usually 10:1, and it can be up to 50:1 by selecting appropriate parameters;
3. The pressure loss is small. For the same β value, the pressure loss is 1/3～1/5 of the orifice;
4. Wear resistance. After the streamlined cone is throttled, a vacuum layer effect is produced on the surface of the cone, making the cone not easy to wear;
5. No clogging, no adhesion. The conical thorough purging design avoids the retention of residue, condensate or particles in the fluid;
6. The signal is stable. “Signal fluctuation” is 1/10 of the orifice;
7. Measurable high-temperature and high-pressure media: the maximum working temperature is 850℃, and the maximum pressure is 40MPa;
8. Can detect dirty media (coke oven gas, blast furnace gas, raw oil, residual oil, etc.);
9. Measurable gas-liquid two-phase medium (humidity, condensate, etc.);

Get A Free Quote

V Cone Flow Meter Description

The V-cone flowmeter is a leap forward in differential pressure flow measurement. The V cone flow meter uses the throttling effect produced by the V cone in the flow field to measure the flow rate by detecting the pressure difference between the upstream and downstream. Compared with ordinary throttling parts, the center hole throttling is changed to annular throttling. Moreover, the V-cone itself acts as a rectifier for the flow field, making it an excellent new flow meter with unique performance.

Sino-Inst’s V cone flow meters can measure liquids, gases, steam, etc., covering almost all flowing media.

V cone Flow Meter Data Sheet

Adopt national standard:	GB/T2624-1993, SY/T6143-2004, international standard ISO5167;
Measuring pipe diameter:	DN15-DN3000;
Accuracy	±0.5%, ±1.5%, ±2.5%;
Repeatability:	±0.1%;
Working pressure:	2.5MPa, 4.0MPa, 6.3MPa, 10.0MPa, 16.0MPa, 26.0MPa,42.0MPa
Measured medium temperature:	<550℃;
Measured medium:	liquid, gas (including natural gas), steam;
Turndown ratio:	10:1;
The straight pipe section requires:	0-3D upstream and 0-1D downstream;
Power supply:	1) External power supply: 24V DC; 2) Internal power supply (internal battery) power supply: 3.6V DC;
Display:	8-digit LCD displays instantaneous flow, cumulative flow, fluid pressure, fluid temperature and fault code;
Output signal:	1) 4-20mA DC flow signal; 2) Output signal conforming to HART protocol; 3) Battery powered flowmeter without output signal;
Explosion-proof performance:	intrinsically safe IbIICT5;
Protection performance:	IP65;

Get V-cone Flowmeter Measurement Solution

Sino-Inst’s V-cone flowmeter is suitable for gases and liquids with a lot of impurities. Especially suitable for measuring gases such as coal gas and flue gas. Supports customization of temperature, pressure, material, etc.

Products Categories

Coriolis Mass Flow Meter

Thermal Gas Mass Flow Meter

Differential Pressure Flow Meter

Electromagnetic Flowmeter

Ultrasonic Flow Meter

Vortex Flowmeter

Turbine Flowmeter

Positive Displacement Flow Meters

Compact Pressure Sensor/Transmitter

High Temperature Pressure Transmitter

Cryogenic Pressure Transducer

High Temperature Melt Pressure Transmitter

Explosion-Proof Pressure Transmitter

Differential Pressure Transmitter

Hydrostatic Level Transmitter

Ultrasonic Level Transmitter

Radar Level Meter

Paperless Recorder

Get A Free Quote

V Cone Flow Meter Applications

V-Cone Flow Meter can successfully measure fluids:

1. Gas:

Gas: coke oven gas, blast furnace gas, city gas;
Natural gas: includes natural gas with a moisture content of more than 5%;
Various hydrocarbon gases: alkanes, olefins and other gases;
Various gas production: hydrogen, helium, argon, oxygen, nitrogen, etc.;
Corrosive gas: wet chloride gas, etc.;
Air: including air containing water, dust, compressed air, etc.;
Flue gas: flue gas discharged from various boilers and heating furnaces;

2. Steam: saturated steam, superheated steam;

3. Liquid

Oils: crude oil, fuel oil, water-containing emulsified oil, diesel, hydraulic oil, etc.;
Water: raw water, drinking water, production water, sewage, etc.;
Various aqueous solutions: acid, alkali, saline solution, etc.;
Organic chemicals: methanol, ethylene glycol, xylene, etc.;

4. Special fluid

Oil + HC gas + sand;
Aerated water: H2O+N2+air; H2O+CO2, etc.;

V Cone Flow Meter-New Type DP Flow Meter Detail Display

More Detail

v cone flow meter working principle

The V-cone flowmeter is a differential pressure flowmeter. Its theory is based on Bernoulli’s theorem of mutual conversion of energy in a closed pipeline. Under the condition of stable flow, the flow rate in the pipeline is proportional to the square root of the differential pressure. That is: △P=P1-P2